DUAL SCREEN 7 INCH
PORTABLE DVD/CD
PLAYER
Owner's Manual
PLEASE READ BEFORE OPERATING THIS EQUIPMENT.
Model: CTFT719
IMPORTANT SAFETY INSTRUCTION
Before using the unit, be sure to read all operating
instructions carefully. Please note that these are
general precautions and may not pertain to your
unit.
third grounding prong. The wide blade or the third
prong are provided for your safety. If the
provided plug does not fit into your outlet, consult
an electrician for replacement of the
obsolete outlet.
1 ) Read these instructions.
All the safety and operating instructions should be
read before the product is operated.
10 ) Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
2 ) Keep these instructions.
The safety and operating instructions should be
retained for future reference.
11 ) Only use attachments/accessories specified
by the manufacturer.
3 ) Heed all warnings.
All warnings on the product and in the operating
instructions should be adhered to.
12 ) Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
4 ) Follow all instructions.
All operating and use instructions should be
followed.
An appliance and cart combination
should be moved with care.
5 ) Do not use this apparatus near water.
Do not use this product near water and moisture,
for example: near a bathtub, washbowl, kitchen
sink or laundry tub; in a wet basement; or near a
swimming pool.
Quick stop, excessive force and
uneven surfaces may cause the
appliance and cart combination to
overturn.
13 ) Unplug this apparatus during lightning
storms or when unused for long periods of
time.
To protect your product from a lightning storm, or
when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This
will prevent damage to the product due to lightning
and power-line surges.
6 ) Clean only with dry cloth.
Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a dry cloth for cleaning.
7 ) Do not block any ventilation openings.
Install in accordance with the manufacturer's
instructions.
Slots and openings in the cabinet and in the back
or bottom are provided for ventilation, to ensure
reliable operation of the product and to protect it
from overheating. These openings must not be
blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa,
rug or other similar surface. This product should
never be placed near or over a radiator or heat
source. This product should not be placed in a
built-in installation such as a bookcase or rack
unless proper ventilation is provided or the
manufacturer's instructions have been adhered to.
14 ) Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus
has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or
moisture does not operate normally, or has been
dropped.
15 ) Power source.
This product should be operated only from the type
of power source indicated on the marking label.
If you are not sure of the type of power supply to
your home, consult your appliance dealer or local
power company. For products intended to operate
from battery power, or other source, refer to the
operation instructions.
8 ) Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus(including amplifiers) that produce heat.
9 ) Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A
grounding type plug has two blades and a
16 ) Power lines
2
CTFT719说明书.indd
2
2012-3-9
11:19:25
IMPORTANT SAFETY INSTRUCTION
An outside antenna system should not be located
in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall
into such power lines or circuits.
specified by the manufacturer or those that have
the same characteristics as the original parts.
Unauthorized substitutions may result in fire or
electric shock or other hazards.
When installing an outside antenna system,
extreme care should be taken to keep from
touching such power lines or circuits as contact
with them might be fatal.
22 ) Safety check
Upon completion of any service or repairs to this
product, ask the service technician to perform
safety checks to determine that the product is in
proper operational condition.
17 ) Overloading
Do not overload wall outlets and extension cords
as this can result in a risk of fire or electric shock.
23 ) Wall or ceiling mounting
The product should be mounted to a wall or ceiling
only as recommended by the manufacturer.
18 ) Object and liquid entry
Never push objects of any kind into the product
through openings as they may touch dangerous
voltage points or short out parts that could result in
fire or electric shock. Never spill or spray any type
of liquid on the product.
24 ) Damage requiring service
Unplug this product from the wall outlet and refer
service to qualified service personnel under the
following conditions.
a ) When the power-supply cord or plug is
damaged.
19 ) Outdoor antenna grounding
If an outside antenna is connected to the product,
be sure the antenna system is grounded so as to
Provide some protection against voltage surges
and built up static charges. Section 810 of the
National Electric Code ANSI/NFPA 70 provides
information with respect to proper to grounding of
the mast and supporting structure, grounding of
the lead-in wire to an antenna discharge product,
size of grounding conductors, location of antenna-
discharge product, connection to grounding
electrodes and requirements for the grounding
electrodes.
b ) If liquid has been spilled or objects have fallen
into the product.
c ) If the product has been exposed to rain or
water.
d ) If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions, as an adjustment of other controls
may result in damage and will and require
extensive work by a qualified technician to restore
in the product to its normal operation.
e ) If the product has been dropped or the cabinet
has been damaged.
f ) when the product exhibits a distinct change in
performance-this indicates a need for service.
ANTENNA LEAD
IN WIRE
25 ) Note to CATV system installer
This reminder is provided to call the CATV system
installer's attention to Article 820-40 of the NEC
that provides guidelines for proper grounding
and, in particular, specifies that the cable ground
shall be connected to the grounding system of the
building, as close to the point of cable entry as
practical.
ANTENNA DISCHARGE UNIT
( NEC SECTION 810-20 )
GROUNDING CONDUCTORS
( NEC SECTION 810-21 )
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
( NEC ART 250, PARTH )
NOTE: Refer all servicing to qualified service
personnel Servicing is required when the unit
has been damaged in any way such as the
following: the power-supply cored or plug has
been damaged, liquid has been spilled into unit,
the unit has been exposed to rain or moisture, the
unit has been dropped or the unit does not operate
normally.
20 ) Service
Do not attempt to service this product yourself
as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
21 ) Replacement parts
When replacement parts are required, be sure
the service technician uses replacement parts
3
CTFT719说明书.indd
3
2012-3-9
11:19:25
IMPORTANT SAFETY INSTRUCTIONS(CONTINUED)
NOTES ON HANDLING:
cold place to a warm place.
● When shipping the unit, always use the original
shipping carton and packing materials.
For maximum protection, repack the unit as it was
originally packed at the factory.
● When you use the DVD player in a room where
you just turned on the heater, or a place where the
cold wind from the air conditioner directly hits the
unit.
● Do not use volatile liquids, such as insect spray,
near the unit. Do not leave rubber or plastic
products in contact with the unit for a long time.
They will leave marks on the finish.
● ln summer, when you use the DVD player in a
hot and humid place just after you moved the unit
from an air conditioned room.
● When you use the DVD player in a humid place.
● The top and rear panels of the unit
may become warm after a long period of use.
This is normal and not a malfunction.
Do not use the DVD player when moisture
condensation may occur.
● lf you use the DVD player in such a situation,
it may damage discs and internal parts. Remove
the disc, connect the AC/DC Adaptor to the DVD
player and the wall outlet, turn on the DVD player
and leave it ON for two or three hours. After two or
three hours, the DVD player will have warmed up
and evaporated any moisture.
● When the DVD player is not in use, be sure
to remove the disc and turn off the power.
NOTES ON LOCATING THE DVD PLAYER:
When you place this unit near a TV, radio or VCR,
the playback picture may become poor and the
sound may be distorted. In this case, move the
unit away from the TV, radio or VCR.
NOTES ON CLEANING:
Use a soft, dry cloth for cleaning
● For stubborn dirt, soak the cloth in a weak
detergent solution, wring well and wipe. Use a
dry cloth to wipe it dry. Do not use any type of
solvent, such as thinner and benzene, as they may
damage the surface of the unit.
● If you use a chemical-saturated cloth to clean
the unit, follow that product's instructions.
Warning: Cleaning and adjustment of lenses and
/or other components of playback mechanism
should be performed by a qualified service
technician.
NOTES ON MOISTURE CONDENSATION:
Moisture condensation damages the DVD
player.
Please read the following carefully.
● Moisture condensation occurs, for example,
when you pour a cold drink into a glass on a warm
day. Drops of water form on the outside of the
glass. In the same way, moisture may condense
on the optical pick-up lens inside this unit, one of
the most crucial internal parts of the DVD player.
Moisture condensation occurs during the
following cases:
● When you bring the DVD player directly from a
4
CTFT719说明书.indd
4
2012-3-9
11:19:25
ABOUT DISCS
The region number for this DVD Player is: 1
See the following page for information regarding region numbers.
PLAYABLE DISCS:
The following discs can be played back on this DVD player:
DISC TYPES:
DVD
Data on most DVDs is divided into sections called titles
and then into subsections called chapters, each of which
is given a title or chapter number. Some features of this
DVD player will not operate with some DVD discs as they
are preset. If a function you selected does not run as
desired , refer to the manual accompanying the DVD disc.
AUDIO CD
Data on an audio CD is divided into sections called tracks ,
each of which is given a track number.
IMPORTANT:
It is important that you read the manual that accompanies the DVD disc , as there are features that are on
the DVD player that cannot be used with certain DVDs .
There are also extra features on the DVD disc that are different for each DVD disc, so they are not explained
in this owner's manual.
This player conforms to the NTSC and PAL color systems . However , if you are in the USA , Canada or
Mexico,leave this setting on NTSC . If incorrectly set to PAL ,the TV picture may roll vertically. In this case ,
set the TV system to NTSC as specified on page 15.
ABOUT DISCS
Notes on Copyright:
It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public and rent copyrighted
material without permission. DVD video discs are copy protected, and any recordings made from these
discs will be distorted. This product incorporates copyright protection technology that is protected by method
claims of certain U.S. Patents and other intellectual property rights owned by Macrovision
Macrovision Corporation, and is intended for home and other limited viewing uses only, unless otherwise
authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Region Management Information:
This DVD Player is designed and manufactured to respond to the Region Management Information that
is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the
Region number of this DVD player, this DVD player cannot play that disc. You may not be able to play back
some DVD video discs on this player if they were purchased from outside your geographic area or made
for business purposes. When you try to play back an unauthorized disc, Wrong Region appears on the TV
screen.
5
CTFT719说明书.indd
5
2012-3-9
11:19:25
LOCATION OF CONTROLS
Main Unit
1
2
3
4
5
6
7
8
1. Play/Pause( ►ІІ ): Press to play or pause.
2. STOP( ■ ): Press to stop the playback.
3. DISPLAY ON/OFF: Turn on or off the display.
4. VOL-: Press to decrease volume level.
5. VOL+: Press to increase the volume level.
6. Charge Indicator: Red Indicator will turn on when the unit is charging, and turn off when the unit
is fully charged.
7. Remote Control Sensor
8. Power Indicator: Green Indicator will turn on when the unit is power on, and turn off if the unit
shut off.
Sub Unit
9
10
11
12
13
14
9. DISPLAY ON/OFF: Turn on or off the display.
10. MUTE: Press to mute the sound, press again to turn the sound back.
11. Display Setup: Press to enter to display setup menu.
12. VOL-: Press to decrease volume level.
13. VOL+: Press to increase volume level.
14. Power Indicator: Turn on when power on the sub-unit, and turn off if shut off the sub-unit.
6
CTFT719说明书.indd
6
2012-3-9
11:19:25
LOCATION OF CONTROLS
Main Unit
15
16 17
18
19
15. ON/OFF: Power ON/OFF Switch,
Slide to ON position to power on.
Slide to OFF position to power off.
16. EARPHONE: Earphone jack.
17. AV OUT: Audio/video output jack.
18. DC OUT: To Connect to sub unit.
19. DC in: DC in jack( DC 9V,
2A
), connect to supplied
AC/DC Adapter.
Sub Unit
20
21
22
23
20. DC IN: DC in jack, connect to the DC out jack
on main unit by the supplied DC connection
cable.
22. EARPHONE: Earphone jack.
23. ON/OFF: Power ON/OFF
Switch, slide to ON position to
power on. Slide to OFF position
to shut off.
21. AV IN: Audio/video in jack, connect to the AV IN
Jack on the main unit by the supplied AV
connection cable.
7
CTFT719说明书.indd
7
2012-3-9
11:19:25
LOCATION OF CONTROLS - REMOTE CONTROL
1. DISPLAY ON/OFF: To turn On or OFF the screen.
DISPLAY ON/OFF
SLOW
2. TITLE: To display the title menu of current disc. Using
the Direction and ENTER buttons to select and play
the desired title.
1
12
13
2
3
4
14
15
16
3. MENU: To display the menu of current disc. Using
the Direction and ENTER buttons to select and play
5
the desired track.
6
17
7
4. PREV ► ► (Previous): Press repeatedly to skip the
tracks backward.
І
18
19
8
5. NEXT►►І: Press repeatedly to skip the tracks
forward.
20
21
22
9
6. Stop ■ : Press to stop.
A-B
7. Direction buttons: press to select the desired
functions within the setting menu.
23
24
ZOOM
10
11
25
8. SETUP: Press to enter or exit setup menu.
26
9. Numeric buttons: Press numeric buttons to enter
numbers.
10. PROG (Program) button: press to display program setting menu. Using the Numeric; Direction
and ENTER buttons to set the program as on screen instructions.
11. ZOOM: Press repeatedly to zoom in/out the picture.
12. SLOW: Press repeatedly to set and play the current video in slow motion. Press the
button to
►ІІ
resume normal playback.
13. GOTO: Press to enter to goto menu. Using the Numeric; Direction and ENTER buttons to select
the desired tract to play.
14. SUBTITLE: Press repeatedly to select the subtitle.
►►
15.
16.
(Fast searching forward): Press repeatedly to searching the desired section forward.
Press ►ІІ button to resume normal playback.
(Fast searching backward): Press repeatedly to searching the desired section backward.
► ►
Press ►ІІ button to resume normal playback.
17. VOL (Volume) +: Press to increase the volume level.
18. ENTER: Press the confirm the selection (settings).
19. VOL (Volume) -: Press to decrease the volume level.
8
CTFT719说明书.indd
8
2012-3-9
11:19:25
LOCATION OF CONTROLS - REMOTE CONTROL
►ІІ
20.
(Play/Pause): Press to play or pause playback.
21. AUDIO: Press repeatedly to select the audio channels.
22. MUTE: Press to turn off the sound. Press again to resume.
23. REPEAT: Press repeatedly to set repeat mode.
24. A-B: During playback, press to set the beginning point of A-B repeat. Press again to set the end
point of A-B repeat. The unit will start playback the selected section repeatedly. To resume normal
playback, press the A-B button again.
25. ANGLE: Press repeatedly to select the available viewing angle.
26. OSD (On Screen Display): Press repeatedly to display the playback status.
Battery installation:
1. Press the tabs on the battery door and lifting it off.
2. Install two (2) x AAA size batteries ( included) into the battery
compart ment as the figure on right and the polarity markings inside
battery compartment.
3. Replace the battery door.
-
+
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated next to the battery
compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and Carbonzinc) or
old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to preventdamage or
injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.
(Follow battery manufacturer`s directions.)
6. Do not dispose of batteries in fire, batteries may explode or leak.
7. Clean the batter contacts and also those ofthe device prior to battery installation.
9
CTFT719说明书.indd
9
2012-3-9
11:19:25
Using AC/DC Adaptor
The unit has a DC (DC ) 7.4V, 1900mAh Li-ion rechargeable battery.
Recharge it by the supplied AC/DC Adaptor as follows:
1. Connected the small plug on the supplied AC/DC Adaptor to the DC
IN Jack on Main unit as the figure on right.
2. Connected the AC/DC Adaptor to the to a wall outlet having 120V,
60Hz AC only.
3. During charging, you can play the disc as usual.
NB: The AC/DC Adaptor is intended to be correctly orientated in a
vertical or floor mount position.
Notes: Your battery will last longer if you follow these simple guidelines
for caring for and storing it.
A. For first time charge, charge it approximate 12 hours. For normal
charge, it need approximate 6 hours.
B. Recharge and store the device within the temperature range of
5°C~35°C (40°F~95°F).
C. Do not overcharge (longer than 24 hours). Excessive charging or
discharging may shorten the battery’s life.
D. Battery life naturally shortens slowly over time.
Main Unit
Video input jack ( yellow )
Audio left channel input jack ( white )
Audio/Video cable( not included )
Audio right channel input jack ( red )
Connected to the TV
10
CTFT719说明书.indd
10
2012-3-9
11:19:25
Using the Car Power Adaptor
☼ Connect to the cigarette lighter socket of a vehicle that has a 12V battery. It is not compatible with
a vehicle that has a 24V battery.
☼ This is a special negative grounded
Car Adapter. Using this Car Adapter
with a plus grounded car can cause
malfunction.
☼ Do NOT plug in the Car Adapter until
the car ignition is turned on.
To the cigarette
Disconnect the Car Adapter from the
lighter socket
cigarette ligher after use.
To DC IN
Jack on the main unit
CONNECTION OF MAIN AND SUB-UNIT:
Main Unit
Sub Unit
DC to DC cable
(included)
3.5mm audio/video
cable(included)
Note: Secondary display cannot operation by
itself and must be connected to the Main
unit.
11
CTFT719说明书.indd
11
2012-3-9
11:19:25
OPERATION
Main unit:
1. Recharged or connect the unit to AC/DC Adaptor; Car Adaptor as previous produce.
2. Lift up the panel on the main unit as the figure below:
Lift up the panel on the main unit
3. Insert the disc to the center spindle with label side face up.
4. Power on the unit by slide the POWER ON/OFF switch on the rear of unit to ON position. The
green power on indicator will turn on and the unit will start playback automatically.
5. For private listening, insert the supplied earbug to the phones jack. The speakers will cut off
automatically.
6. For saving battery power while listening music, press the DISPLAY ON/OFF button to turn off.
Press again to turn it back.
7. To power off, slide the POWER ON/OFF switch to OFF position.
Sub-unit:
1. Connect the sub-unit to the main unit by the supplied DC and AV connection cables as previous
procedures.
2. Slide the POWER ON/OFF switch on the right side of unit to ON position to power on the sub-unit.
3. Press the DISPLAY SETUP button to enter to display setting menu. Press repeatedly to select
desired function to set. Press the VOL +/- button on the sub-unit to set.
4. For private listening, insert the supplied earbug to the phones jack. The speakers will cut off
automatically.
5. For saving battery power while listening music, press the DISPLAY ON/OFF button to turn off.
Press again to turn it back.
6.To power off, slide the POWER ON/OFF switch to OFF position.
12
CTFT719说明书.indd
12
2012-3-9
11:19:25
SETTING MENU
In stop playback, press the SETUP button
on the Remote Control, the setting menu will
appear on the screen. Using the Numeric;
Direction and ENTER buttons to set or reset
the selected functions.
● Downmix
Set the rear audio channels to stereo (hearing
the rear-left channel in Dolby 5.1 disc in left
speaker; rear-right channel in right channel)
or Lt/Rt mode (hearing rear-right and rear-left
channel in both right and left speakers).
General Setup Page
Dolby Digital Step
- - General Setup Page - -
Tv Shape
Lb
- - Dolby Digital Setup- -
Angle Mark
Osd Language
Screen Saver
Last Memory
On
Eng
On
Off
Dual Mono
Dynamic
Go To General Setup Page
Go To dolby digital setup
● Tv Shape: To set the aspect ratio of the
screen to match the current movie.
● Dual Mono:
Select and set the audio channels to play.
● Angle Mark: To turn ON/OFF the angle
mark. When turn on, if multi-angle is available
in the current disc. The angle mark will appear
on the screen.
● Dynamic:
Set the dynamic level or turn it off.
● Osd Lang: To set the language of on screen
display.
Video Setup Page:
- - Video Setup Page - -
● Screen Saver: To turn ON/OFF the screen
saver. If set to on, when the disc stop playback
couple minutes, the screen saver will appear
on the screen.
Main picture
Sub picture
Aspect ration
● Last Memory: To turn ON/OFF the last
memory. When set to on, if playback the
currect disc. It will start playback at the point
you were stopped last time.
Go To Video Setup Page
Speaker Setup Page
● Main Picture: Set the picture quality of main
unit.
- - Speaker Setup Page- -
Downmix
Str
● Sub Picture: Set the picture quality of the
Video output signal through AV Out jack.
● Aspect ration: Set the picture size of Main
unit to 4:3 or 16:9 to match the aspect ration of
the movie.
NOTE: The aspect ration of the sub-unit
cannot turn to 4:3.
Go To Speaker Setup Page
13
CTFT719说明书.indd
13
2012-3-9
11:19:26
SETUP MENU
Preference Page
TROUBLE SHOOTING
- - Preference Page - -
The remote control does not function
• Point the remote directly at the infrared
remote sensor on the unit.
• Replace the battery in the remote with a new
one.
Tv Type
Audio
Ntsc
Eng
Eng
Eng
Subtitle
Disc Menu
Parental
Password
Default
Forget Password
Using the super password "136900" to set or
reset new password.
Go To Preference Page
● Tv Type: Set the color system to NTSC; PAL
or AUTO. (The color system in US; Canada
and Mexico is NTSC).
● Audio: Select and set the priority of the
available language.
● Subtitle: Select and set the priority of the
available language of the subtitle.
● Disc Menu:
Select and set the priority of the available
language of the disc menu.
● Parental: Using the password “136900” to
set or reset the rate level as below:
Level 1 : Kid Saf
Level 2 : G
Level 3 : PG
Level 4 : PG 13
Level 5 : PGR
Level 6 : R
Level 7 : NC17
Level 8 : Adult
● Password:
Password Mode: To turn the set rating ON/
OFF.
Password: To change the password.
● Default: To reset all the setting to factory
default settings.
14
CTFT719说明书.indd
14
2012-3-9
11:19:26
CARE AND MAINTENANCE
Caring for Discs
Treat the disc carefully. Handle the disc only by its edges.
Never allow your fingers to contact with the shiny, unprinted side of the disc.
● Do not attach adhesive tape, stickers, etc. to the disc label.
● Clean the disc periodically with a soft, lint-free,dry cloth, Never use detergents or abrasive cleaners
to clean the disc. If necessary, use a CD cleaning kit.
● If a disc skips or gets stuck on a section of the disc, it is probably dirty or damaged(scratched).
● When cleaning the disc, wipe in straight lines from the center of the disc to the outer edge of the
disc. Never wipe in circular motions.
● Discs should be stored in their cases after each use to avoid damage.
● Do not expose discs to direct sunlight, high temperatures or dust, etc. Prolonged exposure or
extreme temperatures can warp the disc.
● Do not stick or write anything on either side of the disc. Sharp writing Instruments, or the ink, may
damage the surface.
Cleaning the Unit
● To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning.
● The finish on your unit may be cleaned with a dust cloth and cared for as other furniture. Use
caution when cleaning and wiping the plastic parts.
● Mild soap and a damp cloth may be used on the front panel.
15
CTFT719说明书.indd
15
2012-3-9
11:19:26
SPECIFICATIONS
Power Source:
Main Unit
Built-in DC 7.4V,1900mAh Li-ion battery
Recharge by DC 9V, 2A
AC Adapter
Input : 100-240V~, 50/60Hz
Output : DC 9V, 2A
Car Adapter
Input Voltage: DC 12V
Output Voltage : DC 12V, 1.4A
Built-in fuse: F-2A,250V
Power Source of Remote Control
DC 3V, 2x “AAA” size batteries, included
Power consumption:
Color system:
18W (Max)
NTSC / PAL
OBattery charging time :
Battery life (Full charge) :
Discs played :
Approximately 6 hours
Approximately 2 hours
(1) DVD-VIDEO disc
12cm single-sided, single-layer
12cm single-sided, dual-layer
12cm double-sided, single-layer
8cm single-sided, single-layer
8cm single-sided, dual-layer
8cm double-sided, single-layer
12cm disc
(2) Compact disc
8cm disc
Video output level:
1 Vp-p
Audio output level:
1.5Vrms(1 KHz, 0dB)
Audio signal output characteristics:
Frequency responses:
DVD (linear audio):
20Hz-20KHz (48KHz sampling)
20Hz-20KHz (96KHz sampling)
20Hz-20KHz
CD aydui:
S/N ratio :
70dB
Pickup:
Wave length :
Laser power :
DVD640±10nm, CD790±15nm
CLASS 1
ACCESSORIES
• Remote control: uses 2 x AAA size batteries (included)
• 3.5mm audio/video connection cable
• Earphones
• AC/DC Adapter
• Car Adapter
• DC connection cable
• Headrest straps
• Instruction Manual
x 1
x 1
x 2
x 1
x 1
x 1
x 2
x 3
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
16
CTFT719说明书.indd
16
2012-3-9
11:19:26
LIMITED WARRANTY
Craig warrants this product to be free from manufacturing defects in material and
workmanship under normal use for a period of 90 days from date of purchase. If service
is required, please return the product to the store where it was purchased for exchange;
or, pack the unit in the original packing material with all accessories if applicable, a copy
of your sales receipt and a Cashier’s check or Money Order for $20.00 (to cover shipping
and handling costs) payable to Craig Electronics Inc. For consumers in Canada, please
make sure that the cashier check or money order is redeemable through a U.S. bank.
Ship your product freight pre-paid. Your unit will be repaired, replaced or if the unit can
not be repaired or replaced, a refund will be forwarded to you within four weeks of receipt
of your unit. Please ship your unit to:
Craig Electronics Inc.
1160 NW 163 Drive
Miami, Fl 33169
This warranty is void if the product has been: a) Used in a commercial application or
rental. b) Damaged through misuse, negligence, or abuse. c) Modified or repaired by
anyone other than an authorized Craig service center. d) Damaged because it is
improperly connected to any other equipment.
Note: This warranty does not cover: a) Ordinary adjustments as outlined in the Owner’s
Manual which can be performed by the customer. b) Damage to equipment not properly
connected to the product. c) Any cost incurred in shipping the product for repair. d)
Damage to the product not used in the USA.
This warranty is not transferable and only applies to the original purchase. Any implied
warranties, including the warranty of merchantability, are limited in duration to the period
of this expressed warranty and no warranty whether expressed or implied shall apply to
the product thereafter.
Under no circumstance shall Craig be liable for any loss or consequential damage arising
out of the use of this product. This warranty gives specific legal rights. However, you may
have other rights which may vary from state to state. Some states do not allow limitations
on implied warranties or exclusion of consequential damage. Therefore, these
restrictions may not apply to you.
To Obtain Service on your Product
email:[email protected]
Printed in China
CTFT719-IB-E0CL1-H0US
|