Fujitsu Laptop T4010 User Manual

Fujitsu LifeBook  
T Series  
BIOS Guide  
LifeBook T Series Model:  
T4010/T4010D  
Document Date: 10/01/2004  
Document Part Number: FPC58-1296-01  
F U J I T S U C O M P U T E R S Y S T E M S  
1
 
M a i n M e n u  
If your tablet emits a series of beeps that  
sounds like a code and the display is  
blank, please refer to the Troubleshoot-  
ing section of your system Use’s Guide.  
The Troubleshooting Section includes a  
list of error messages and their mean-  
ings.  
If your data security settings require it,  
you may be asked for a password before  
the operating system will be opened.  
3. If an error message is displayed on the screen, and  
you want to enter the setup utility, press the [F2] key.  
4. When the setup utility starts with a fault present, the  
system displays the following message:  
Warning!  
Error message  
[Continue]  
5. Press any key to enter the setup utility. The system  
will then display the Main Menu with current  
parameters values.  
3
 
L i f e B o o k  
T
S e r i e s T a b l e t P C  
MAIN MENU – SETTING STANDARD SYSTEM PARAMETERS  
The Main Menu allows you to set or view the current  
system parameters. (See Navigating through the Setup  
Utility on page 2 for more information)  
System Time and System Date can also be  
set from your operating system without  
using the setup utility. Use the calendar  
and time icon on your Windows Control  
panel or type time or date from the MS-  
DOS prompt.  
The following tables show the names of the menu fields  
for the Main menu and its submenus, all of the options  
for each field, the default settings and a description of  
the field’s function and any special information needed  
to help understand the field’s use. Note that the actual  
drive labels shown may vary.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Boot  
Info  
Exit  
Item Specific Help  
System Time:  
System Date:  
[02:34:56]  
[10/03/2004]  
Adjust calendar clock.  
Primary Master  
[FUJITSU MHT2040AT-(PM)]  
Secondary Master  
[TOSHIBA DVD-ROM SD-R2512-(SM)]  
<Tab>, <Shift-Tab>, or  
<Enter> selects field.  
Language:  
[English (US)]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter Select  
Sub-Menu  
Figure 1. Main Menu  
Table 1: Fields, Options and Defaults for the Main Menu  
Menu Field  
Options  
Default  
Description  
System Time:  
–—  
–—  
Sets and displays the current time. Time is in a 24 hour format  
of hours:minutes:seconds with 2 digits for each. (HH:MM:SS).  
Example: 16:45:57. You may change each segment of the time  
separately. Move between the segments with the [Tab] key and/or  
[Shift] + [Tab] keys.  
System Date:  
–—  
–—  
Sets and displays the current date. Date is in a month/day/year  
numeric format with 2 digits each for month and day and 4 digits  
for year. (MM/DD/YYYY) for example: 03/20/1998. You may  
change each segment of the date separately. Move between the  
segments with the [Tab] key and/or [Shift] + [Tab] keys.  
4
 
M a i n M e n u  
Table 1: Fields, Options and Defaults for the Main Menu  
Menu Field  
Options  
Default  
Description  
Primary  
Master:  
The product # of  
the Hard Drive  
Display the type of device on this ATA/ATAPI interface, if there is  
one. Pressing the Enter key selects the Primary Master submenu  
allowing additional device configuration options for this interface.  
Selects Primary  
Master submenu  
Secondary  
Master:  
The product # of  
the Optical Drive  
Display the type of device on this interface, if there is one. Pressing  
the Enter key selects the Secondary Master submenu allowing  
additional device configuration options for this interface.  
Selects Secondary  
Master submenu  
Language:  
English (US)  
Japanese (JP)  
[English (US)]  
The default setting differs between the US/European and the  
Japanese model. Selects the display language for the BIOS.  
5
 
L i f e B o o k  
T
S e r i e s T a b l e t P C  
Primary Master Submenu of the Main Menu  
The Primary Master submenu identifies what ATA  
devices are installed.  
Note that actual hard drive label shown may vary.  
Depending on the drive type, information such as cylin-  
ders, heads and sectors may also be displayed.  
PhoenixBIOS Setup Utility  
Main  
Primary Master [FUJITSU MHT2040AT-(PM)]  
Item Specific Help  
Type:  
[Auto]  
LBA Format  
78140160  
40008MB  
Select ATA/ATAPI drive  
installed here.  
Total Sectors:  
Maximum Capacity:  
[Auto]  
The BIOS auto-types the  
drive on boot time.  
Multi-Sector Transfers:  
LBA Mode Control:  
Transfer Mode:  
[16 Sectors]  
[Enabled]  
[Multiword DMA 2]  
[Disabled]  
Except [Auto]  
You enter parameters of  
the drive.  
Ultra DMA Mode:  
[None]  
The drive is disabled.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 2. Primary Master Submenu  
Menu Field  
Options  
Default  
Description  
Type:  
Auto  
None  
CD-ROM  
Hard Disk  
[Auto]  
Selects the ATA/ATAPI device type. Select Auto to have the type  
automatically identified by the BIOS at POST. If None is selected, all  
of the following Set-up items do not appear. Select CD-ROM if a  
CD-ROM drive is installed at this connection. If Hard Disk is  
selected, you must specify the number of Cylinders, Heads, and Sec-  
tors for the drive.  
LBA Format  
Logical Block Addressing (LBA)  
Total Sectors:  
---  
---  
The total number of sectors on your hard disk  
---  
---  
Maximum  
Capacity:  
The maximum capacity of your hard disk  
CHS Format  
Cylinders/Heads/Sectors  
Cylinders:  
A number between  
0 and 65,535  
–—  
This item is active only when Hard Disk is selected as the type. This  
field is changed by incrementing (pressing the [Spacebar]) or by typ-  
ing in the number.  
6
 
M a i n M e n u  
Menu Field  
Options  
Default  
Description  
Heads:  
A number between  
1 and 16  
–—  
This item is active only when Hard Disk is selected as type. You can  
change the value by incrementing (pressing the [Spacebar]) or by  
typing in the number.  
Sectors:  
A number between  
0 and 63  
–—  
This item is active only when Hard Disk is selected as type. You can  
change the value by incrementing (pressing the [Spacebar]) or by  
typing in the number.  
Maximum  
Capacity:  
Display only  
–—  
Displays the maximum capacity of the drive calculated from the  
parameters of the hard disk when Auto is selected and the type  
is identified as hard disk.  
Multi-Sector  
Transfers:  
Disabled  
2 Sectors  
4 Sectors  
8 Sectors  
16 Sectors  
[16 Sectors]  
This option cannot be changed when Auto is selected. Specify the  
number of sectors per block for multiple sector transfer.  
LBA Mode Control:  
Transfer Mode:  
Disabled  
Enabled  
[Enabled]  
Enables or disables logical Block Addressing in place of Cylinder,  
Head, Sector addressing. This option cannot be changed when Auto  
is selected.  
Standard  
Fast PIO 1  
Fast PIO 2  
Fast PIO 3  
Fast PIO 4  
Multiword DMA 1  
Multiword DMA 2  
[Multiword  
DMA 2]  
Selects the method for moving data to/from the drive. Autotype the  
drive to select the optimum transfer mode. This option cannot be  
changed when Auto is selected.  
Ultra DMA Mode:  
Disabled  
Mode 0  
Mode 1  
Mode 2  
Mode 3  
Mode 4  
Mode 5  
[Disabled]  
Selects the method for moving data to/from the drive. Autotype the  
drive to select the optimum transfer mode. This option cannot be  
changed when Auto is selected.  
A bootable CD-ROM may have either a floppy disk or hard drive format. When the bootable CD-ROM is  
used, the drive allocations change automatically without changing the BIOS setup. If a floppy disk format  
CD-ROM is used, the CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive for-  
mat) if the internal hard drive is not present or is disabled. The bootable CD-ROM can never use a C: des-  
ignation if a formatted internal hard drive is present since the C: designator is always reserved for the  
internal hard drive.The boot sequence ignores the new drive designations, however, your application soft-  
ware will use the new designations.  
Be careful of the operating environment when booting from a CD-ROM or you may overwrite files by  
mistake.  
7
 
L i f e B o o k  
T
S e r i e s T a b l e t P C  
Secondary Master Submenu of the Main Menu  
The Secondary Master submenu is for the internal CD-ROM drive. The drive type is displayed on this menu as well as  
the Main menu. Your notebook auto-senses the characteristics of the internal CD-ROM Drive installed. You will not  
need to modify these settings; they are displayed for your reference. Note that actual drive labels shown may vary.  
PhoenixBIOS Setup Utility  
Main  
Secondary Master [TOSHIBA DVD-ROM SD-R2512-(SM)]  
Item Specific Help  
Type:  
[Auto]  
Select ATA/ATAPI drive  
installed here.  
Multi-Sector Transfers:  
LBA Mode Control:  
Transfer Mode:  
[Disabled]  
[Disabled]  
[Standard]  
[Disabled]  
[Auto]  
The BIOS auto-types the  
drive on boot time.  
Ultra DMA Mode:  
Except [Auto]  
You enter parameters of  
the drive.  
[None]  
The drive is disabled.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 3. Secondary Master Submenu  
Menu Field  
Options  
Default  
Description  
Type:  
• Auto  
• None  
• CD-ROM  
• Hard Disk  
[Auto]  
Selects the ATA/ATAPI device type. Select Auto to have the  
type automatically identified by the BIOS at POST. If None is  
selected, all of the following Set-up items do not appear.  
Select CD-ROM or Hard Disk for appropriate drive type  
installed at this connection.  
Multi-Sector  
Transfers:  
• Disabled  
• 2 Sectors  
• 4 Sectors  
• 8 Sectors  
• 16 Sectors  
[Disabled]  
[Disabled]  
This option cannot be changed when Auto is selected. Spec-  
ify the number of sectors per block for multiple sector trans-  
fer.  
LBA Mode  
Control:  
• Disabled  
• Enabled  
Enables or disables Logical Block Addressing in place of Cyl-  
inder, Head, Sector addressing. This option cannot be  
changed when Auto is selected.  
8
 
M a i n M e n u  
Menu Field  
Options  
Default  
Description  
Transfer Mode:  
• Standard  
• Fast PIO 1  
• Fast PIO 2  
[Standard]  
Selects the method for moving data to/from the drive.  
Autotype the drive to select the optimum transfer mode.  
This option cannot be changed when Auto is selected.  
• Fast PIO 3  
• Fast PIO 4  
• Multiword DMA 1  
• Multiword DMA 2  
Ultra DMA  
Mode:  
• Disabled  
• Mode 0  
• Mode 1  
• Mode 2  
• Mode 3  
• Mode 4  
• Mode 5  
[Disabled]  
Selects the method for moving data to/from the drive.  
Autotype the drive to select the optimum transfer mode.  
This option cannot be changed when Auto is selected.  
Exiting from Main Menu  
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to  
another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit  
menu or to move to another menu.  
9
 
L i f e B o o k  
T
S e r i e s T a b l e t P C  
ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS  
The Advanced Menu allows you to:  
Follow the instructions for Navigating Through the  
Setup Utility to make any changes.  
Set the I/O addresses for the infrared ports.  
Set the features of the keyboard/mouse.  
Select between the display panel and/or an external  
(See Navigating through the Setup Utility on page 2 for  
more information)  
CRT display.  
Set internal device configurations  
Configure USB features.  
Configure miscellaneous features such as Wake Up On  
The following tables show the names of the menu fields  
for the Advanced Menu and its submenus, all of the  
options for each field, the default settings and a descrip-  
tion of the field’s function, and any special information  
needed to help understand the field’s use.  
LAN.  
Configure DMI Event Logging.  
PhoenixBIOS Setup Utility  
Security Boot Info  
Main  
Advanced  
Exit  
Item Specific Help  
IrDA Port Configurations  
Keyboard/Mouse Features  
Video Features  
Configures IrDA ports.  
Internal Device Configurations  
CPU Features  
USB Features  
Miscellaneous Configurations  
Event Logging  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select  
F9 Setup Defaults  
F10 Save and Exit  
Sub-Menu  
Figure 4. Advanced Menu  
10  
 
A d v a n c e d M e n u  
Table 4: Fields, Options and Defaults for the Advanced Menu  
Menu Field  
Description  
IrDA Port Configurations  
When selected, opens the IrDA Port Configurations submenu which allows the user to modify settings for  
infrared ports.  
Keyboard/Mouse  
Features  
When selected, opens the Keyboard/Mouse Features submenu, which allows setting external and internal  
keyboard and mouse parameters.  
Video Features  
When selected, opens the Video Features submenu, which allows setting of the display parameters,  
including routing of video signals to different displays.  
Internal Device  
Configurations  
When selected, opens the Internal Device Configuration submenu, which allows enabling or disabling the  
IDE LAN, and modem controllers.  
CPU Features  
USB Features  
When selected, opens the CPU Features submenu, which allows the user to modify the Intel(R) Speed-  
Step(R) features.  
Configures USB features.  
Miscellaneous  
Configurations  
Configures miscellaneous features, such as Wake Up On LAN and Power Button.  
Event Logging  
When selected, opens the event logging submenu.  
11  
 
L i f e B o o k  
T
S e r i e s T a b l e t P C  
IrDA Port Configuration Submenu of the Advanced Menu  
The IrDA Port Configuration submenu provides the  
ability to set the I/O addresses and interrupt levels for  
I/O addresses, DMA channels, and  
Interrupt levels can be entered in various  
ways, including via the BIOS setup utility,  
the control software for the I/O device, or  
the hardware. If any two ports or devices  
have the same I/O address assigned your  
tablet will not function normally. Please  
keep a record of original settings before  
making any changes in the event that a  
restoration is required. See your hardware  
and software documentation as well as the  
setup utility to determine settings,  
the infrared ports of your tablet.  
To prevent IRQ and address conflicts,  
avoid changing the default settings. If  
you must change the settings, you can  
call 1-800-8Fujitsu for technical assis-  
tance.  
The BIOS will warn you of resource con-  
flicts by placing a yellow asterisk next to  
each device that is in conflict.  
limitations, etc.  
All I/O addresses in Table 5 are in hexa-  
decimal.  
PhoenixBIOS Setup Utility  
Advanced  
Item Specific Help  
IrDA Port Configurations  
Infrared Port:  
[Enabled]  
[Disabled]  
Mode:  
[FIR]  
The port is disabled.  
I/O Address:  
Interrupt:  
I/O Address:  
DMA Channel:  
[2E8-2EF]  
[IRQ 6]  
[400-43F]  
[DMA 3]  
[Enabled]  
The port is enabled  
with user configuration.  
[Auto]  
Plug & Play OS  
configure the port.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select  
F9 Setup Defaults  
F10 Save and Exit  
Sub-Menu  
Figure 5. IrDA Port Configuration Submenu  
12  
 
A d v a n c e d M e n u  
Table 5: Fields, Options and Defaults for IrDA Port Configuration Submenu of Advanced Menu  
Menu Field  
Options  
Default  
Description  
Infrared Port:  
Disabled  
Enabled  
Auto  
[Enabled]  
Configures the infrared port using either no configuration (Disabled), a  
user defined configuration (Enabled), or by allowing the BIOS or OS to  
choose the configuration (Auto).  
Mode:  
IrDA  
FIR  
[FIR]  
Select whether to use normal infrared or fast infrared mode.  
I/O Address:  
3F8 - 3FF  
2F8 - 2FF  
3E8 - 3EF  
2E8 - 2EF  
[2E8 - 2EF]  
Allows user to set the infrared port base I/O address when infrared port is  
Enabled.  
Interrupt:  
IRQ 3  
IRQ 6  
IRQ 10  
IRQ 11  
[IRQ 6]  
Allows user to set the infrared port interrupt when infrared port is Enabled.  
Allows user to set the infrared port I/O address when FIR is Enabled.  
I/O Address:  
DMA Channel:  
400 - 43F  
480 - 4BF  
500 - 53F  
580 - 5BF  
[400 - 43F]  
[DMA 3]  
DMA 1  
DMA 3  
Allows user to set the infrared port DMA Channel when the infrared port  
is Enabled.  
13  
 
L i f e B o o k  
T
S e r i e s T a b l e t P C  
Keyboard/Mouse Features Submenu of the Advanced Menu  
The Keyboard/Mouse Features submenu is for setting the parameters of NumLock.  
PhoenixBIOS Setup Utility  
Advanced  
Security  
Power Savings  
Exit  
Keyboard/Mouse Features  
[Off]  
Item Specific Help  
Numlock:  
Selects power-on state  
for Numlock.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 6. Keyboard/Mouse Features Submenu  
Table 6: Fields, Options and Defaults for the Keyboard/Mouse Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
Numlock:  
On  
Off  
[Off]  
Sets the NumLock function state when the computer completes  
booting.  
On/Padlock Off  
14  
 
A d v a n c e d M e n u  
Video Features Submenu of the Advanced Menu  
The Video Features Submenu is for setting the display parameters.  
PhoenixBIOS Setup Utility  
Security Power Savings Exit  
Main  
Advanced  
Video Features  
Item Specific Help  
Display:  
[Auto]  
Select display terminal.  
Compensation: [Enabled]  
* This setting is not  
effective after  
operating system  
starts up.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select  
F9 Setup Defaults  
F10 Save and Exit  
Sub-Menu  
Figure 7. Video Features Submenu  
Table 7: Fields, Options and Defaults for the Video Features Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
Display:  
Internal Flat Panel  
[Auto]  
Selects where the video signal will be routed.  
External (Analog)  
External (Digital)  
Auto  
Compensation:  
Disabled  
Enabled  
[Enabled]  
Enables or disables display compensation. Display com-  
pensation is used to match the native resolution of the  
display with the input. For example, if you are using an  
application whose resolution causes it to appear smaller  
than the screen, enabling Compensation will expand the  
image to fill the screen.  
15  
 
L i f e B o o k  
T
S e r i e s T a b l e t P C  
Internal Device Configurations Submenu of the Advanced Menu  
The Internal Device Configuration submenu allows the user to configure other internal devices.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Item Specific Help  
Internal Device Configurations  
[Disabled]  
No IDE ports are  
enabled.  
IDE Contoller:  
Bluetooth(R):  
Modem Controller:  
LAN Controller:  
Wireless LAN:  
[Both]  
[Enabled]  
[Enabled]  
[Enabled]  
[Enabled]  
[Primary]  
Only primary IDE port  
is enabled.  
[Secondary]  
Only secondary IDE port  
is enabled.  
[Both]  
Both primary and  
secondary IDE ports  
are enabled.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select  
F9 Setup Defaults  
F10 Save and Exit  
Sub-Menu  
Figure 8. Internal Device Configuration Submenu  
Table 8: Fields, Options and Defaults for the Internal Device Configuration Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
IDE Controller:  
Disabled  
Primary  
Secondary  
Both  
[Both]  
Allows you to enable and/or disable any or all IDE devices.  
Bluetooth(R):  
Disabled  
Enabled  
[Enabled]  
[Enabled]  
[Enabled]  
Enables or disables the optional Bluetooth device.  
Enables or disables the modem device.  
Modem Controller:  
LAN Controller:  
Disabled  
Enabled  
Disabled  
Enabled  
Auto  
Enables or disables the LAN controller.When Auto is selected, the  
LAN will be disabled when the system is running on battery power  
and the LAN cable is not connected.  
Note: If Auto is selected, you will need to attach your Ethernet  
cable prior to booting up the system.  
Wireless LAN:  
Disabled  
Enabled  
[Enabled]  
Enables or disables the optional wireless LAN device.  
16  
 
A d v a n c e d M e n u  
CPU Features Submenu of the Advanced Menu  
The CPU Features Submenu allows the user to modify the Intel(R) SpeedStep(R) Technology features.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Item Specific Help  
CPU Features  
Select Enhanced  
Intel(R) SpeedStep(R)  
Technology enabled or  
disabled.  
SpeedStep(R) Technology:  
On Battery:  
On AC:  
[Enabled]  
[Battery Optimized]  
[Maximum Performance]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter Select  
Sub-Menu  
Figure 9. CPU Features Submenu  
Table 9: Fields, Options and Defaults for the CPU Features Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
SpeedStep(R)  
Technology:  
Disabled  
Enabled  
[Enabled]  
Enables or disables SpeedStep(R) Technology which  
allows the user to determine the CPU performance when  
the tablet is running on AC or battery. This technology  
decreases power consumption by decreasing CPU speeds.  
On Battery:  
On AC:  
Maximum Performance  
Battery Optimized  
Automatic  
[Battery Optimized]  
Allows the user to select the CPU performance when the  
system is running on battery power.  
Maximum Performance  
Battery Optimized  
Automatic  
[Maximum Performance]  
Allows the user to select the CPU performance when the  
system is running on AC power.  
17  
 
L i f e B o o k  
T
S e r i e s T a b l e t P C  
USB Features Submenu of the Advanced Menu  
The USB Features Submenu configures the USB features for your system.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
USB Features  
Item Specific Help  
[Enabled]  
Legacy USB Support:  
[Disabled]  
SCSI SubClass Support:  
[Enabled]  
The feature is disabled.  
[Enabled]  
Legacy Floppy Emulation  
is enabled and USB  
floppy is available  
without USB aware OS.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter Select  
Sub-Menu  
Figure 10. USB Features Submenu  
Table 10: Fields, Options and Defaults for the USB Features Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
Legacy USB  
Support:  
Disabled  
Enabled  
[Enabled]  
When Disabled is selected, legacy USB emulation is disabled. When  
Enabled is selected, legacy USB emulation is enabled and USB  
devices are available without USB-aware OS.  
SCSI SubClass  
Support:  
Disabled  
Enabled  
[Enabled]  
When Enabled is selected, USB devices that belong to the SCSI sub-  
class in the mass storage class (e.g., USB Memory Key) are enabled.  
18  
 
A d v a n c e d M e n u  
Miscellaneous Configurations Submenu of the Advanced Menu  
The Miscellaneous Configurations Submenu configures miscellaneous features for your system.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Item Specific Help  
Miscellaneous Configurations  
Power Button:  
[Disabled]  
[Disabled]  
[Off]  
Configures the power  
button.  
Wake up on LAN:  
Auto Save To Disk:  
Volume Setting:  
[Middle]  
*ACPI OS ignores this  
setting.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter Select  
Sub-Menu  
Figure 11. Miscellaneous Configurations Submenu  
Table 11: Fields, Options and Defaults for the Miscellaneous Configurations Submenu  
Menu Field  
Options  
Default  
Description  
Power Button:  
Disabled  
Power Off  
[DIsabled]  
When Disabled is selected, the power button does not respond to a  
press. When Power Off is selected, the button turns the power off.  
Wake up on LAN:  
Auto Save To Disk:  
Disabled  
Enabled  
[Disabled]  
[Off]  
When Enabled is selected, the system will wake up when the internal  
LAN device receives a Magic Packet while the system is powered off.  
Off  
On  
Turns the Auto Save To Disk feature on and off. When turned on,  
when low battery state is reached, the system in suspend state will  
save its state to disk and power off.  
Volume Setting:  
Off  
Minimum  
Middle  
Maximum  
[Middle]  
Allows you to set or disable the system volume level.  
19  
 
L i f e B o o k  
T
S e r i e s T a b l e t P C  
Event Logging Submenu of the Advanced Menu  
The Event Logging Submenu configures event logging features for DMI events.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Event Logging  
Item Specific Help  
Event Log Capacity:  
Event Log Validity:  
Space Available  
Valid  
Press <Enter> key to  
view the contents of  
the event log.  
View Event Log:  
[Enter]  
Event Logging:  
[Enabled]  
System Boot Event:  
[Disabled]  
Clear All Event Logs:  
Mark Events as Read:  
[No]  
[Enter]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select  
F9 Setup Defaults  
F10 Save and Exit  
Sub-Menu  
Figure 12. Event Logging Submenu  
Table 12: Fields, Options and Defaults for the Event Logging Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
Event Log  
Capacity:  
Space Available  
Display only.  
Event Log Validity:  
View Event Log:  
Event Logging:  
Valid  
Display only.  
Enter  
[Enter]  
[Enabled]  
Allows you to view content of event log.  
Turns event logging on and off for all DMI events.  
Disabled  
Enabled  
System Boot  
Event:  
Disabled  
Enabled  
[Disabled]  
[No]  
Turns event logging on and off for DMI system boot events.  
When set to [Yes] all event logs will be cleared at next boot.  
Allows you to make all events currently in the event log as read.  
Clear All Event  
Logs:  
No  
Yes  
Mark Events as  
Read:  
Enter  
[Enter]  
20  
 
S e c u r i t y M e n u  
SECURITY MENU – SETTING THE SECURITY FEATURES  
The Security menu allows you to set up the data security  
features of your tablet to fit your operating needs and to  
view the current data security configuration. Follow the  
instructions for Navigating Through the Setup Utility to  
make any changes. (See Navigating through the Setup  
Utility on page 2 for more information)  
If you set a password, write it down and  
keep it in a safe place. If you forget the  
password you will have to contact your  
support representative to regain access  
to your secured functions and data.  
If you make an error when re-entering  
the password a [Warning] will be dis-  
played on the screen. To try again press  
the [Enter] key and then retype the pass-  
word. Press the [Esc] key to abort the  
password setting process.  
Entering a password incorrectly three times  
in a row will cause the keyboard and  
mouse to be locked out and the warning  
[System Disabled]to be displayed. If  
this happens, restart the computer by  
turning off and on the power with the  
power switch and use the correct  
password on reboot. Note: Unless you  
have previously enabled the power switch  
in the BIOS, it will not be possible to turn  
off the unit with the switch. This is  
If the Password on Boot is Disabled you  
will not have to type your password  
upon resuming the system from the Sus-  
pend or Save-to-Disk modes.  
The following tables show the names of the menu fields  
for the Security menu and its submenus, the options for  
each field, the default settings and a description of the  
field's function and any special information needed to  
help understand the field's use. The default condition is  
no passwords required and no write protection.  
applicable for non-ACPI OS’s.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Boot  
Info  
Exit  
Item Specific Help  
Supervisor Password Is:  
User Password Is:  
Clear  
Clear  
Press <Enter> key to  
set Supervisor Password  
to enable any password  
features.  
Set Supervisor Password  
Set User Password  
Minimum User Password Length: [0]  
[Enter]  
[Enter]  
Password on Boot:  
[Disabled]  
Then password entry is  
required to enter BIOS  
Setup.  
On Automatic Wake up:  
Boot from Removable Media:  
Flash Write:  
[Disabled]  
[All]  
[Enabled]  
Hard Disk Security  
Owner Information  
Security Chip Setting  
Security Panel On Resume:  
[Enabled]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 13. Security Menu  
21  
 
L i f e B o o k  
T
S e r i e s T a b l e t P C  
Table 13: Fields, Options and Defaults for the Security Menu  
Menu Field  
Options  
Default  
Description  
Supervisor  
Password is:  
–—  
Clear  
A display-only field. Set is displayed when the system Supervisor  
Password is set and Clear when it is not.  
User Password is:  
–—  
Clear  
A display-only field. Set is displayed when the general User Password is  
set, and Clear when it is not.  
Set Supervisor  
Password  
[Enter]  
[Enter]  
Sets, changes or cancels Supervisor Password. The Supervisor Password  
may be up to eight characters long and include only letters or numbers  
(no symbols). Passwords are NOT case- sensitive. To cancel a password  
press the Enter key instead of entering characters in the Enter New Pass-  
word field and in the Re-enter New Password field. When a Supervisor  
Password is set it must be used to access the BIOS setup utility.  
Set User Password  
[Enter]  
[Enter]  
This field can only be accessed if the Supervisor Password is set. Sets,  
changes or cancels the User Password. The User Password may be up to  
eight characters long and must include only letters or numbers (no  
symbols). Passwords are NOT case-sensitive. To cancel a password press  
the Enter key instead of entering characters in the Enter New Password  
field and in the Re-enter New Password field. When a User Password is  
set it must be used to access the BIOS setup utility.  
Minimum User  
[0]  
[0]  
Sets the minimum length for User Password.  
Password Length:  
Password on Boot:  
Disabled  
First Boot  
Every Boot  
[Disabled]  
When Enabled, a password (User or Supervisor) is required after the  
Power On Self Test (POST) before the operating system will be read from  
a disk. When set to Disabled no password is required. If no Supervisor  
Password is set this feature is not available and no password is required.  
On Automatic  
Wake up:  
Disabled  
Enabled  
[Disabled]  
This field is active only when Password On Boot is set to First Boot or  
Every Boot. When disabled, password entry is not required on automatic  
wake up on LAN or Real Time Clock. When enabled, the password is still  
required on automatic wake up.  
Boot from  
Removable Media:  
All  
[All]  
Selecting Supervisor Only allows supervisor access only.  
Supervisor only  
Flash Write:  
Disabled  
Enabled  
[Enabled]  
When set to disabled, the BIOS Flash Memory will be write-protected.  
Hard Disk Security  
–—  
–—  
–—  
–—  
Submenu that allows you to configure hard disk security features.  
Submenu that allows you to set Owner information.  
Owner  
Information  
Security Chip  
Setting  
–—  
–—  
Submenu that allows you to configure the security chip.  
Security Panel On  
Resume  
Disabled  
Enabled  
[Enabled]  
Allows the Security Panel Feature to be enabled or disabled upon  
Suspend from Resume.  
22  
 
S e c u r i t y M e n u  
Hard Disk Security Submenu of the Security Menu  
The Hard Disk Security Submenu is for configuring hard disk security features.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Hard Disk Security  
Item Specific Help  
Primary Master Password Is:  
Secondary Master Password Is:  
Clear  
Not Available  
Press <Enter> key to  
set Hard Disk Password.  
The hard disk is locked  
with the password. Data  
in the locked disk can  
not be read on other  
systems.  
[Enter]  
[Enter]  
Set Primary Master Password:  
Set Secondary Master Password  
Password Entry on Boot:  
[Enabled]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter  
Select  
Sub-Menu  
Figure 14. Hard Disk Security Submenu  
Table 14: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu  
Menu Field  
Options  
Default  
Description  
Primary  
Master  
Password Is:  
___  
Clear  
Display-only. Default is Clear. When the Primary Master Password has been set,  
the field changes to Set. When this password is set, the primary hard disk drive  
cannot be used in another system unless the password is entered.  
Secondary  
Master  
Password Is:  
___  
___  
Not  
Available  
Display only.  
Set Primary  
Master  
Password:  
[Enter]  
Sets, changes or cancels the Primary Master Password. The Primary Master Pass-  
word may be up to seven characters long and must include only letters or num-  
bers (no symbols). Passwords are NOT case-sensitive. When a Primary Master  
Password is set, it must be used to access the primary hard drive if it is used in  
another system. Note that the password will not take effect until the system has  
been rebooted.  
Set Secondary  
Master  
___  
[Enter]  
Not currently available.  
Password:  
Password  
Entry on Boot:  
• Disabled  
• Enabled  
[Enabled]  
When disabled, it is not necessary to enter a Hard Disk Password before booting.  
The hard disk is still password-protected without entering a password.  
23  
 
L i f e B o o k  
T
S e r i e s T a b l e t P C  
Owner Information Submenu of the Security Menu  
The Owner Information Submenu is for setting owner information. Note that Owner Information cannot be set  
without having entered a supervisor’s password.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Owner Information  
Item Specific Help  
Owner Information Is:  
Set Owner Information  
Clear  
Press <Enter> key to  
set owner information.  
Up to 80 characters can  
be set. Available  
characters are ASCII  
codes from 32 through  
126.  
[Enter]  
Foreground Color:  
Background Color:  
[Gray]  
[Black]  
The owner information  
is always displayed at  
the bottom line of the  
screen during POST.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 15. Owner Information Submenu  
Table 15: Fields, Options and Defaults for the Owner Information Submenu of the Security Menu  
Menu Field  
Options  
Default  
Description  
Owner  
–—  
Clear  
Display only.  
Information Is:  
Set Owner  
Information:  
–—  
[Enter]  
[Gray]  
Field to write owner infor-  
mation (e.g., your name).  
Foreground  
Color:  
Black  
Blue  
Green  
Red  
Gray  
Light Red  
Light Magenta  
Yellow  
Set foreground color.  
Magenta  
Brown  
White  
Light Blue  
Light Green  
Light Cyan  
Cyan  
Bright White  
Background  
Color:  
Black  
Blue  
Green  
Cyan  
Red  
Gray  
Light Red  
Light Magenta  
Yellow  
[Black]  
Sets background color.  
Magenta  
Brown  
White  
Light Blue  
Light Green  
Light Cyan  
Bright White  
24  
 
S e c u r i t y M e n u  
Security Chip Setting Submenu of the Security Menu  
The Security Chip Setting Submenu is for enabling or disabling the embedded security chip.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Security Chip Setting  
[Disabled]  
Item Specific Help  
Security Chip:  
Select Security Chip  
enabled or disabled.  
* A reboot is required  
after exit to configure  
Security Chip correctly.  
Clear Security Chip  
becomes selectable  
after the reboot.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 16. Security Chip Setting Submenu  
Table 16: Fields, Options and Defaults for the Security Chip Setting Submenu of the Security Menu  
Menu Field  
Options  
Default  
Description  
Security Chip:  
• Disabled  
• Enabled  
[Disabled]  
Select to enable or disable the security chip. Note that after configuring the  
security chip, a system reboot is required.  
Exiting from the Security Menu  
When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to  
another menu. If you wish to exit from setup utility, press the [Esc] key to go to the Exit Menu. If you wish to move to  
another menu, use the cursor keys.  
25  
 
L i f e B o o k  
T
S e r i e s T a b l e t P C  
BOOT MENU – SELECTING THE OPERATING SYSTEM SOURCE  
The Boot Menu is used to select the order in which the  
BIOS searches sources for the operating system. Follow  
the instructions for Navigating Through the Setup  
Utility to make any changes. (See Navigating through the  
Setup Utility on page 2 for more information)  
The following tables show the names of the menu fields  
for the Boot menu and its submenu, all of the options  
for each field, the default settings and a description of  
the field's function and any special information needed  
to help understand the field's use.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Boot  
Info  
Exit  
Item Specific Help  
Quick Boot:  
[Enabled]  
Boot Time Diagnostic Screen:  
Boot Menu:  
Preboot Execution Environment:  
Boot Device Priority  
[Disabled]  
[Enabled]  
[Disabled]  
[Disabled]  
All diagnostic tests  
will be done.  
[Enabled]  
Some diagnostic tests  
may be skipped while  
booting to speed up.  
F1 Help  
ESC Exit  
Select Item -/Space Change Values  
Select Menu Enter  
Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 17. Boot Menu  
Table 17: Fields, Options and Defaults for the Boot Menu  
Menu Field  
Options  
Default  
Description  
Quick Boot:  
Disabled  
Enabled  
[Enabled]  
Turns on and off booting with a truncated set of Power On Self Tests. (Fewer  
tests mean faster turn on.)  
Boot Time  
Diagnostic Screen:  
Disabled  
Enabled  
[Disabled]  
[Enabled]  
[Disabled]  
__  
Turns on and off display of test results instead of Fujitsu logo screen during  
Power On Self Test.  
Boot Menu:  
Disabled  
Enabled  
When disabled, the [F12] key cannot be used to invoke the Boot menu. When  
enabled, click the [F12] button to display the Boot menu while booting up.  
Preboot Execution  
Environment:  
Disabled  
Enabled  
Turns on and off boot from network server options.  
Boot Device  
Priority:  
Selects Boot  
Device Priority  
submenu  
This menu allows setting up the source for the operating system. See “Boot  
Device Priority Submenu” in the following section. Pressing the [F12] key will  
also let you choose the boot device.  
26  
 
B o o t M e n u  
The Boot Device Priority Submenu of the Boot Menu  
The Boot Device Priority Submenu is for setting the  
order of checking of sources for the operating system.  
Be aware of the operating environment  
when booting from a CD-ROM or you  
may overwrite files by mistake.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Boot  
Boot Device Priority  
Item Specific Help  
+Floppy Disk Drive  
+Hard Disk Drive  
CD-ROM Drive  
Keys used to view or  
configure devices:  
<Enter> expands or  
collapses devices with  
a + or -.  
<Ctrl+Enter> expands  
all.  
<Shift+1> enables or  
disables a device.  
<+>/<Space> or <->  
moves the device up or  
down.  
<d> removes a device  
that is not installed.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter  
Select  
Sub-Menu  
Figure 18. Boot Device Priority Submenu  
Table 18: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu  
Menu Field  
Description  
+Floppy Disk Drive  
+Hard Disk Drive  
CD-ROM Drive  
The boot selections determine the order in which the BIOS searches for the operating system during a startup  
sequence. To change the order highlight one source by using the [up] or [down] cursor keys and then press the  
[+] or [-] key to change the order number for that source. Be sure to save your changed order when you exit the  
BIOS setup utility.  
Exiting from Boot Menu  
When you have finished setting the boot parameters with the Boot menu, you can either exit from the setup utility or  
move to another menu. If you wish to exit from the setup utility press the [Esc] key to go to the Exit menu. If you wish  
to move to another menu, use the cursor keys.  
27  
 
L i f e B o o k  
T
S e r i e s T a b l e t P C  
INFO MENU – DISPLAYS BASIC SYSTEM INFORMATION  
The Info menu is a display only screens that provides the  
configuration information for your tablet.  
those fields. These fields are for information purposes  
only, and are not editable.  
The following table shows the names of the menu fields  
for the Info menu and the information displayed in  
The information, including CPU type and  
speed, and total memory, displayed on this  
screen varies according to the unit you  
purchased.  
PhoenixBIOS Setup Utility  
Security Boot Info  
Main  
Advanced  
Exit  
Item Specific Help  
BIOS Version:  
BIOS Date:  
1.03  
09/22/2004  
BIOS Area:  
E000h - FFFFh  
CPU Type:  
CPU Speed:  
L1 Cache:  
L2 Cache:  
Intel(R) Pentium(R) M 745  
1.80 GHz  
64 KB  
2048 KB  
Total Memory:  
512 MB  
Memory Slot 1: 512 MB DDR SDRAM  
Memory Slot 2: None  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9  
Setup Defaults  
F10 Save and Exit  
Figure 19. Info Menu  
Table 19: Fields, Options and Defaults for the Info Menu  
Note that the parameters listed in the following table may be different, depending upon your system configuration.  
Menu Field  
Default  
Menu Field  
Default  
BIOS Version:  
1.03  
L1 Cache:  
64 KB  
BIOS Date:  
BIOS Area:  
CPU Type:  
CPU Speed:  
09/22/2004  
L2 Cache:  
2048 KB  
512 MB  
E000h – FFFFh  
Intel(R) Pentium(R) M 745  
1.80 GHz  
Total Memory:  
Memory Slot 1:  
Memory Slot 2:  
512 MB DDR SDRAM  
None  
28  
 
E x i t M e n u  
EXIT MENU – LEAVING THE SETUP UTILITY  
The Exit Menu is used to leave the setup utility. Follow the instructions for Navigating Through the Setup Utility to  
make any changes. (See Navigating through the Setup Utility on page 2 for more information). The following table shows  
the names of the menu fields for the Exit menu, the default settings and a description of the field's function and any  
special information needed to help understand the field's use.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Boot  
Exit  
Item Specific Help  
Exit Saving Changes  
Exit Discarding Changes  
Load Setup Defaults  
Discard Changes  
Exit System Setup and  
save your changes to  
CMOS.  
Save Changes  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9  
Setup Defaults  
F10 Save and Exit  
Figure 20. Exit Menu  
Table 20: Fields, Options and Defaults for the Exit Menu  
Menu Field  
Description  
Exit Saving  
Changes  
Exit Saving Changes and Exit will store all the entries on every menu of the setup utility to the BIOS memory and  
then exit the setup utility. A confirmation message Save Configuration changes and exit now? [Yes]  
[No] will be displayed.  
Exit Discarding  
Changes  
Selecting Exit Discarding Changes and Exit will exit the setup utility with out writing to the BIOS memory. When the  
BIOS recognizes this selection it will load the operating system and begin operation.  
Load Setup  
Defaults  
Selecting Load Setup Defaults will load the factory preset default values for all menu fields, then display the message  
Load default configuration now? [Yes] [No]. When confirmed the setup utility will return to the Exit  
Menu. To return to another menu follow the directions in the Navigating Through the Setup Utility Section.  
Discard Changes  
Save Changes  
Selecting Discard Changes will load the previous values in BIOS memory for all menu fields. The message Load  
previous now? [Yes] [No] will be displayed. When confirmed the utility will return to the Exit menu. To  
return to another menu, follow the directions in the Navigating Through the Setup Utility Section.  
Selecting Save Changes causes the new settings in all menus to be written to the BIOS memory. The message Save  
configuration changes now? [Yes] [No] will be displayed. When confirmed, the setup utility will return  
to the Exit menu. To go to another menu, follow the directions in the Navigating Through the Setup Utility section.  
29  
 

Eagle Electronics Fish Finder Cuda 240 S GPS User Manual
Electro Voice Microphone ND357A User Manual
Extron electronic Computer Hardware 4G TX RX User Manual
Extron electronic Network Router DTPTEU232 User Manual
Fisher Paykel Water Pump 2534C 02 User Manual
Frigidaire Washer FAFW4011L B W User Manual
FUNAI CRT Television F4813T User Manual
GE Convection Oven 169140 User Manual
Goodman Mfg Furnace GDS80453AXCA User Manual
Goodman Mfg Furnace GHS80453AXCA User Manual